Indoor Waterfalls made of glass
Indoor Waterfall Glass in the SCHÜCO showroom
Indoor Waterfall 5x5m, flooded on both sides. The drip tray is made of stainless steel and was covered with wood by a carpenter.
2 glass Indoor Waterfalls in the entrance area as a customer magnet
These 2 Indoor Waterfalls stand in the entrance area of an exclusive shop in Karlsruhe. Even passers-by from the opposite side of the street stop in amazement to take a closer look at the spectacle. More attention = more sales.
Indoor Waterfall Glass Kreissparkasse Groß-Gerau
500x250cm large Indoor Waterfall Glass, whose pane is free on the left and right. The frame was additionally fixed to the ceiling with wire ropes so that it cannot tip over. The automatic water technology is located in the basement.
Indoor Waterfall Glass in private flat
Indoor Waterfall approx. 3x2m as narrow room divider. All the technical equipment is in or under the drip tray: reverse osmosis for decalcification, automatic filling with magnetic float valve, overflow protection, drainage and dosing device with water additive against algae and germs.
Indoor Waterfall Glass at Airbus
When pilots collect their new aircraft at Airbus, they usually see this Indoor Waterfall from us. The drip tray is embedded in the floor and the water technology is located under the stairs.
Indoor Waterfall Glass without frame in private flat
Indoor Waterfall with water distribution in only approx. 5cm suspended ceiling as well as drip tray embedded in approx. 14cm high floor. Water technology is in the cellar.
Indoor Waterfall Glass with sandblasted logo
Indoor Waterfall Glass with sandblasted logo
This Indoor Waterfall serves as a room divider in a hotel. It separates the reception from the breakfast and restaurant area.
Indoor Waterfall Glass with sandblasted logo 2
Although the water only flows on one side of the glass pane, the water waves look the same from both sides. Even if you stand directly in front of it, you can hardly tell on which side of the pane the water is flowing.
Indoor Waterfall Glass with sandblasted logo 3
A stencil is applied to the glass pane with an adhesive film. Afterwards, sandblasting or glass bead blasting is used to grind off the area that is not covered with adhesive film.
Indoor Waterfall Glass with sandblasted logo 4
Both the reception and the restaurant benefit from the fascinating look of this Indoor Waterfall on both sides.
Indoor Waterfall Glass with adhesive film on the back
The glass panels were laminated from the back by the company Kusterer Werbetechnik. The front side is flooded. The drip tray is nicely narrow because the water treatment and pump technology could be accommodated in the cellar.
Indoor Waterfall Glass without frame in the waiting area
The Indoor Waterfall separates the entrance door from the waiting area. Together with the green moss wall, a small waiting oasis is created. The waterfall emerges from an opening in the ceiling and flows into a drip tray embedded in the floor. All the technology is located in the basement for easy maintenance and access.
Indoor Waterfall Mirrorglass with stainless steel frame
The lighting creates beautiful reflections of the water on the ceiling of this waterfall.
Indoor Waterfall Mirrorglass with wooden cladding
The wooden cladding beautifully integrates this Indoor Waterfall into its surroundings.
Indoor Waterfall Glass in the Ithaka Science Center Venlo
475x225cm Indoor Waterfall Glass in the Ithaka Science Centre. The Indoor Waterfall is intended to represent the cycle of water as it flows from the clouds via the rivers into the oceans of the earth and back again.
Indoor Waterfall Glass with adhesive logo
As a sales promotion in a perfumery department.
7m long Indoor Waterfall Glass with digital print
To set the scene for the element of water and fish, a digital print with fish was applied to the dry wall behind this Indoor Waterfall.
7m long Indoor Waterfall Glass with digital print
The water treatment and pump technology is located in a furniture piece next to the Indoor Waterfall.
2.5m Indoor Waterfall Glass with digital print
Indoor Waterfall as sales promotion at a seafood counter.
3m Indoor Waterfall Glass with digital print
Yet another Indoor Waterfall as an eye-catcher and customer magnet.
Indoor Waterfall Glass
Simple Indoor Waterfall for manual operation. I.e. there is only a pump and a dirt filter in the drip tray. Evaporated water is manually refilled.
Indoor Waterfall Glass in smokers' bar
3x2m Indoor Waterfall behind a counter in a smoker's bar. The dark surroundings and lighting make this Indoor Waterfall particularly attractive. It also cleans and relieves the air in this bar where smoking is allowed. The smoke adheres to the water like all other suspended matter and dissolves in it.
Indoor Waterfall Glass in bakery as room divider to café area
The modern drive-in bakery Geiger has implemented an Indoor Waterfall as a room divider to separate the busy sales counter from the quiet café area.
Indoor Waterfall Glass in planning office as room divider to waiting area
In this engineering office, this Indoor Waterfall serves to increase the well-being of waiting customers.
Indoor Waterfall Glass in planning office as room divider to waiting area 2
Visually and acoustically a convenient separation, so that you are undisturbed while waiting.
Indoor Waterfall Glass in hospital
This Indoor Waterfall embellishes the waiting area in a hospital.
Indoor Waterfall Glass in swimming pool
Like a waterfall at a mountain lake, this Indoor Waterfall in a swimming pool simulates nature. Especially in SPA and Wellnes, the beautiful waves of a water wall can contribute to relaxation and well-being.
Indoor Waterfall Glass in private apartment
This Indoor Waterfall was designed and produced for a Swiss satellite technician according to his ideas.
Indoor Waterfall Glass at a trade fair
As a customer magnet at a trade fair - where water flows, most people feel comfortable.
Indoor Waterfall Glass embedded in wall
This Indoor Waterfall was integrated into a wall.
